per-port-per-vlan

From: Hafizur Rahman \(UK\) (hafizur.rahman@uk.didata.com)
Date: Tue Sep 19 2006 - 08:39:08 ART


Hi

 

I want to match all traffic coming from a server ip and non-ip
would
following achieve that it is for per-port-per vlan configuration
Class-map all

Match any

 

Class-map match-all cisco

Match vlan 8
Match all

 

Policy-map test

Class cisco

Set ip pres 3
Thanks in advance

 

Hafi

Sheikh Rahman
Senior Technical Engineer
Dimension Data United Kingdom
Dimension Data House
Building 2 , Waterfront
Business Park
Hampshire GU51 3QT
+44 12 5277 9330 Office
+44 12 5277
9010 Fax
hafizur.rahman@uk.didata.com

For further information about
Dimension Data, please go to
www.dimensiondata.com
-----------------------------------------
Dimension Data - providing global
IP based solutions and services
for over 20 years supported locally from a
single point of contact.

This email is confidential. If you are not the
intended recipient
then you must not copy it, forward it, use it for any
purpose, or
disclose it to another person.

Please also note that the
author of this email is not authorised
to; make any offers capable of
acceptance unless expressly stated
in a validly dated and attached document
which shall be subject to
the terms and conditions stated therein or,
conclude any contract
on behalf of Dimension Data by email.

Although
Dimension Data has taken reasonable precautions to ensure
no viruses are
present in this email, the company cannot accept
responsibility for any loss
or damage arising from the use of this
email or attachments.



This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART