IEWB v3v1 lab 16, task 4.2 (neighbor command in ospf)

From: tonynguyenchi (tonynguyenchi.ccie@gmail.com)
Date: Mon Sep 25 2006 - 00:27:55 ART

• Next message: Daniel Fredrick: "Re: BGP routing table won't keep both routes"
• Previous message: Brad Ellis: "Re: CCIE Home Lab [bcc][faked-from]"
• Next in thread: Tim Chan: "Re: IEWB v3v1 lab 16, task 4.2 (neighbor command in ospf)"
• Maybe reply: Tim Chan: "Re: IEWB v3v1 lab 16, task 4.2 (neighbor command in ospf)"
• Maybe reply: tonynguyenchi: "Re: IEWB v3v1 lab 16, task 4.2 (neighbor command in ospf)"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Dear Group,

R3, R4, R5 connected together over frame-relay point-to-multipoint
non-broadcast network. But when I type:
neighbor 154.1.0.4 cost 97
the outpout is:
-> OSPF: Neighbor command is allowed only on NBMA and point-to-multipoint
networks

In the interface connect to frame-relay, I configured:
interface Serial0/1/0
 ip address 154.1.0.3 255.255.255.0
 ip pim sparse-mode
 encapsulation frame-relay
 ip ospf network point-to-multipoint non-broadcast
 no fair-queue
 frame-relay map ip 154.1.0.4 304
 frame-relay map ip 154.1.0.5 305
 frame-relay interface-dlci 304
 no frame-relay inverse-arp
 frame-relay lmi-type cisco

Thanks and best regards,

Tony

• Next message: Daniel Fredrick: "Re: BGP routing table won't keep both routes"
• Previous message: Brad Ellis: "Re: CCIE Home Lab [bcc][faked-from]"
• Next in thread: Tim Chan: "Re: IEWB v3v1 lab 16, task 4.2 (neighbor command in ospf)"
• Maybe reply: Tim Chan: "Re: IEWB v3v1 lab 16, task 4.2 (neighbor command in ospf)"
• Maybe reply: tonynguyenchi: "Re: IEWB v3v1 lab 16, task 4.2 (neighbor command in ospf)"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:41 ART