RE: ospf issue

From: cciestudy@anbell.net
Date: Mon Oct 09 2006 - 09:03:16 ART

• Next message: toonsh dosh: "LAN QoS"
• Previous message: Petr Lapukhov: "Re: IPSEC config between pix, concentrator, and router using"
• Maybe in reply to: RRC: "ospf issue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi
Check the nieghbors
non broadcast needs a static neighbor statement on one side of the link

------- Original Message -------
From : RRC[mailto:ronnieroshan@gmail.com]
Sent : 10/8/2006 5:25:55 PM
To : ccielab@groupstudy.com
Cc :
Subject : RE: ospf issue

 Hi Folks !

 Ive this issue in Lab 19 of IE Labs !!! Its somethin like this $$ SEE IMAGE
ATTACHED $$

ive R6 / R5 and SW2 all in OSPF Area 568 !

1. R5 e0/0 is a Ethernet Port
2. R6 fa0/0 is a FastEthernet Port
and so is SW2 : VLAN 568 !!!!!

All 3 of em have been made converted from B/C to NON B/C by the command IP
OSPF NETWORK NON-BC !!!

Now R6 can ping N/Ws in SW2 but cannot ping N/ws beyong R5 and N/ws beyond
R5 cant ping / reach N/ws connected or advertised by R6 !!! I guess uve got
the picture !!!

Wat cud be the reason n the soln ?

Does R5 being a E0/0 ie an interface cost of OSPF 10 have anything to
do with it ?

Also the Loopbacks as well as COnnected n/ws have been redistributed too
into OSPF 568 !

thank u !

• Next message: toonsh dosh: "LAN QoS"
• Previous message: Petr Lapukhov: "Re: IPSEC config between pix, concentrator, and router using"
• Maybe in reply to: RRC: "ospf issue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:04 ART