From: Frank (ocsic@web.de)
Date: Fri Oct 27 2006 - 04:07:55 ART
I found out, when i configure:
ip pim rp-address 150.1.3.3
on the RP this message will go away. Is this neccessary for SD mode with
Auto-RP?
I have never read about this. Although it does not seem to change anything.
Thanks,
Frank
> Hi,
>
> im getting these messages. But i don't have any "ip pim accept-rp" or
> ip pim accept-register" configured. These messages sould appear if the
> RP does
> not want to accept. R3 is the RP and R5 is the mapping agent.
>
> *Mar 12 04:49:24.203: %PIM-1-INVALID_RP_REG: Received Register from
> router 176.1.35.5 for group 239.3.1.1, 150.1.3.3 not willing to be RP
> *Mar 12 04:46:11.451: %PIM-6-INVALID_RP_JOIN: Received (*, 239.3.1.1)
> Join from 176.1.35.5 for invalid RP 150.1.3.3
>
>
> Rack1R3#sh ip pim rp map
> PIM Group-to-RP Mappings
> This system is an RP (Auto-RP)
>
> Rack1R3#s | inc ann
> ip pim send-rp-announce Loopback0 scope 15 group-list 33 interval 5
>
> Rack1R3#sh access-lists 33
> Standard IP access list 33
> 10 permit 239.3.0.0, wildcard bits 0.0.255.255
>
> Rack1R5#s | inc disc
> ip pim send-rp-discovery Loopback0 scope 16
>
> Can someone help out?
>
>
> Frank
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:06 ART