From: Rodgers Moore (rodgers@the-moores.org)
Date: Tue Nov 07 2006 - 17:36:15 ART
I had a practice lab that cannot find now... It was perfect to get the feel
of what's expected in the lab. If anyone has it, please post. I goes
something like this...
Task 1. You have 3 squares of gauze, a rusty razor blade, and a fifth of
Jack Daniels.
a) remove your appendix
b) do not suture until the lab proctor has approved your work.
Task 2. A Siberian tiger which has not been fed in 5 days will be released
into the lab in 15 minutes. You have a box of misc parts from an AK-47 and
an all-inclusive manual written in Chibcha. What do you do?
etc... My favorite:
Task 7. Define God and give three examples.
cheers,
Rodgers Moore
PS: For those that missed it, Chibcha has no written form and has been
extinct for ~300 years. Also, the objective doesn't specify the manual is
for an AK-47.
----- Original Message -----
From: "Chris Jenkins" <chrisjenkins@hotmail.com>
To: <security@groupstudy.com>; <ccielab@groupstudy.com>
Sent: Tuesday, November 07, 2006 1:59 PM
Subject: RE: Denying telnet to port 23 on VTY
> Hmmm... you could have a point! Are these the kind of questions I should
> be
> expecting in the lab?
>
>> Subject: RE: Denying telnet to port 23 on VTY> Date: Tue, 7 Nov 2006
> 22:35:22 +1100> From: ben.holko@globalcenter.net.au> To:
> secondie@gmail.com;
> security@groupstudy.com; ccielab@groupstudy.com> > What seems to be a
> recurring theme in lab questions - think outside the> square> > If you
> have
> typed the question below correctly, then you should use the> rotary
> command,
> and then "telnet input ssh"> > But this will disable
> telnet......shock-horror,
> that is what the> question (notably the "deny all") is asking you to do:>
> > >
> Enable VTY to accept telnet on port 3003 and deny all telnet access to>
> VTY.
> ACL not allowed.> > It says "deny all telnet access", not "deny all telnet
> access on port> 23"> > B.> > > -----Original Message-----> From:
> nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of>
> secondie>
> Sent: Tuesday, November 07, 2006 1:05 PM> To: security@groupstudy.com;
> ccielab@groupstudy.com> Subject: Denying telnet to port 23 on VTY> >
> Question
> asks for: Enable VTY to accept telnet on port 3003 and deny> all telnet
> access
> to VTY. ACL not allowed.> > 3003 part is easy, use rotary but can port 23
> be
> disabled on VTY line so> that telnet is not accepted on the VTY line?> >
> For
> those that have trinet security lab workbook, (Trinet superlab-1,> section
> 8.5, task#1)> > > -secondie> >
> _______________________________________________________________________>
> Subscription information may be found at: >
> http://www.groupstudy.com/list/CCIELab.html>
> _________________________________________________________________
> Check the weather nationwide with MSN Search: Try it now!
> http://search.msn.com/results.aspx?q=weather&FORM=WLMTAG
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:45 ART