From: Ian Blaney (ian.blaney@gmail.com)
Date: Thu Nov 09 2006 - 18:43:29 ART
Bajo
Imagine the spoke router with the RFC1490 encapsulation frame IETF is not a
cisco router. I have labbed it up and no matter what I do with an all Cisco
setup it always works,
Ian
On 11/9/06, Bajo <bajoalex@gmail.com> wrote:
>
> Ian...as far as both routers are from Cisco, it does not matter what you
> set it....Try to lab it ...is very easy :)
>
> On 11/9/06, Ian Blaney <ian.blaney@gmail.com> wrote:
>
> > I am sure this has been asked before but I cannot find the answer in the
> > archives.
> >
> > In a frame relay hub and 2 spokes scenario with static mappings where
> > one
> > spoke is
> > configured with RFC190 "encapsulation frame IETF". Is it necessary to
> > configured
> > IETF on the frame map of the other spoke as well as the hub?
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
>
> --
> Kind Regards,
>
> Bajo
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:45 ART