From: Horak, Gregor (gregor.horak@sunrise.net)
Date: Thu Nov 16 2006 - 09:38:15 ART
use the router-ids for the virtual-link!
regards,
greg
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Alexey Tolstenok
Sent: Donnerstag, 16. November 2006 12:33
To: Frank
Cc: Cisco certification
Subject: Re: ospf without area 0
Yes this solution won't survive a reboot.
But I think Cisco won't introduce such hardcore on the Lab
2006/11/16, Frank <ocsic@web.de>:
>
> Alexey Tolstenok schrieb:
> > You can add virtual links and then on one router add and put
> > loopback iface in area0 After virtual-link come up, you may exclude
> > area 0 statemnet from configuration.
> >
> > --
> > SY, Alexey
>
> Hi Alex,
>
> ok. But this is a fix. I can't use this in the lab right?
>
> This makes sure, that if area 0 gets disconnected for some reason,
> there is still convergence, until area 0 comes back.
>
> But when routers are rebooted, the virtual link will not come up
again.
>
>
> Frank
>
-- SY, Alexey
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:47 ART