From: Bajo (bajoalex@gmail.com)
Date: Wed Nov 29 2006 - 18:19:40 ART
This link will help u Mark:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12225see/scg/swfallbk.htm
On 11/29/06, Mark Rushby <mark.rushby@gmail.com> wrote:
>
> thanks
>
> So how do I setup a vlan bridge?
>
> Cheers
>
>
> On 29/11/06, WorkerBee <ciscobee@gmail.com> wrote:
> >
> > Yes, same goes for 3550. It bridges non IP packets such as NetBEUI,
> > DECnet, etc. With fallback bridging, you can forward non-IP packets
> > that the switch does not route between VLAN bridge domains and routed
> > ports.
> >
> >
> >
> http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12225see/scg/swfallbk.htm
> >
> >
> > On 11/29/06, Mark Rushby <mark.rushby@gmail.com> wrote:
> > > Hi Group
> > >
> > > I have been doing some research on 3560 features. I'm a bit confused
> on
> > > fall-back bridging; the docCD seems to indicate that it will not
> bridge
> > IP
> > > and IPv6. Is this the case or have misunderstood?
> > >
> > > Thanks in advance
> > >
> > > Mark
> > >
> > >
> _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Kind Regards,Bajo
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:49 ART