From: Frank (ocsic@web.de)
Date: Tue Dec 05 2006 - 11:37:56 ART
Frank schrieb:
ok. this time it's not on the lab.
> Hi,
>
> i'm having problems creating the neighbor statements for ipv6.
> There is always also an ipv6 neighborstatement added under
> address-family ipv4 and the peering session does not come
> up.
> As far is i know, the ipv6 neighbor statement should not
> appear inside the ipv4 family. But it does.
>
> Frank
>
> router bgp 200
> bgp router-id 150.1.1.1
> bgp log-neighbor-changes
> neighbor 2001:CC1E:1::3 remote-as 300
> neighbor 162.1.13.3 remote-as 300
> neighbor 192.10.1.6 remote-as 200
>
> !
> address-family ipv4
> neighbor 2001:CC1E:1::3 activate
> neighbor 162.1.13.3 activate
> neighbor 192.10.1.6 activate
> neighbor 192.10.1.254 activate
> no auto-summary
> no synchronization
> exit-address-family
> !
> address-family ipv6
> neighbor 2001:CC1E:1::3 activate
> network 2001:CC1E:1:1::/64
> exit-address-family
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:36 ART