BGP Syn and Route-reflector problem

From: haducbinh (haducbinh@vnpro.org)
Date: Fri Dec 22 2006 - 09:05:15 ART


Hi GS!

This is topology: R1------R2----R3----R4-----R5

IGP information:

R2,R3,R4: running OSPF

BGP information:

 R1 in AS 1000

 R5 in AS 5000

 R2,R3,R4 in AS 100, must enable synchronyzation all router and R3 is
route-reflector of R2, R4

The problem is: R1 advertise network "X" to R2 via BGP, then R2 redistribute
network "X" to OSPF because of BGP synchronyzation rule, and at R4 received
2 route "X": one via OSPF(with router-id R2) and one via BGP(with router-id
R3). Because of this, route "X" unsyn. So R4 DO NOT advertise route "X" to
R5!

I can not find solution to this situation! Can not change bgp router-id on
R3 equal with ospf router-id on R2 (if we do that, route "X" via BGP on R3
will unsyn).

Could anyone help me with this?

Thanks!

HaDucBinh
Email: <mailto:haducbinh@vnpro.org> haducbinh@vnpro.org
Y/M: haducbinh
Phone: +84 908 191 322
---------------------------------------------------------------------------
Vietnamese Professionals (VnPro)
Cisco Authorised Training
149/1D Ung Van Khiem St - Ward 25 - Binh Thanh Dist - HCMC
Tel: (08) 5124257 - (08) 5125314 Fax: (08) 5124314
Website: <http://vnpro.vn> http://vnpro.vn Support Forum:
<http://vnpro.org> http://vnpro.org



This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:38 ART