From: Victor Cappuccio (vcappuccio@desca.com)
Date: Sat Dec 30 2006 - 14:51:26 ART
IP1CAN01(config-if)#do show poli int mu1
Multilink1
Service-policy output: ip-A-mpls-Egreso (1954)
Class-map: Grupo-Interno-QOS:5 (match-all) (14350017/1)
34614 packets, 3599856 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: mpls experimental 5 (5328242)
Class of service queue: 59
Queue-limit: 1024 packets (default)
Current queue-depth: 0 packets, Maximum queue-depth: 0 packets
Average queue-depth: 0.000 packets
Bandwidth: 4760 kbps
Class-map: class-default (match-any) (15651809/0)
24755 packets, 7554928 bytes
5 minute offered rate 42000 bps, drop rate 0 bps
Match: any (13125634)
Class of service queue: 58
Queue-limit: 2048 packets (default)
Current queue-depth: 0 packets, Maximum queue-depth: 0 packets
Average queue-depth: 0.000 packets
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
bob b
Sent: Saturday, December 30, 2006 1:42 PM
To: ccielab@groupstudy.com
Subject: Show question
All,
Just a quick question, how do you perform a show command while in config
mode. I have forgotten the function used to this.
Many Thanks
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:40 ART