From: Frank (ocsic@web.de)
Date: Thu Jan 04 2007 - 11:23:59 ART
Gavin Lawson schrieb:
Be carefull. When it's said, configure eigrp 100 not to send out over
other interfaces, then it could
be meant to configure passive interface, even it's not directly needed.
Frank
> No passive interface is not needed.
>
> GL
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Frank
> Sent: Thursday, 4 January 2007 8:35 PM
> To: ccielab@groupstudy.com
> Subject: passive-interface
>
> Hi,
>
> when there is a question about not sending out of a specific interface
> in eigrp and i configured this interface only under the routering
> process like:
>
> interface e0/0
> ip add 150.1.1.1 255.255.255.0
>
> router eigrp 100
> netwo 150.1.1.1 0.0.0.0
>
>
> EIGRP will not send out any other interfaces like RIP.
> Is the passive interface command needed here, when the question asks for
> not sending out other interfaces? Or does the quesiton automatically
> imply, that the passive interface command should be used?
>
>
> Frank
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:55 ART