From: Hash Aminu (hashng@gmail.com)
Date: Mon Jan 08 2007 - 09:07:22 ART
hello Guys
I am having problem with portsecurity with the following configuration. but
as soon as i removed the portsecurity everything comes back to normal, else
the port gets disabled. this is a catalyst 6513 . and these ports are
connected to different type of servers, IBM, SUN e.t.c
could someone verify my configuration or came accross this issue befoer, may
be a bug or something.
Thanks in advance
hash
fine the config below
6513#sh run int gi 1/19
Building configuration...
Current configuration : 228 bytes
!
interface GigabitEthernet1/19
no ip address
switchport
switchport mode access
switchport nonegotiate
switchport port-security
spanning-tree portfast
end
6513#sh run int gi 1/19
Building configuration...
Current configuration : 228 bytes
!
interface GigabitEthernet1/19
description " DN PORTAL - cabinet I - NOC2 - Wessam Haggag 1300"
no ip address
switchport
switchport mode access
switchport nonegotiate
switchport port-security
spanning-tree portfast
end
cat6513#sh interfaces gi 1/19 switchport
Name: Gi1/19
Switchport: Enabled
Administrative Mode: static access
Operational Mode: static access
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: native
Negotiation of Trunking: Off
Access Mode VLAN: 1 (default)
Trunking Native Mode VLAN: 1 (default)
Voice VLAN: none
Administrative private-vlan host-association: none
Administrative private-vlan mapping: none
Administrative private-vlan trunk native VLAN: none
Administrative private-vlan trunk encapsulation: dot1q
Administrative private-vlan trunk normal VLANs: none
Administrative private-vlan trunk private VLANs: none
Operational private-vlan: none
Trunking VLANs Enabled: ALL
Pruning VLANs Enabled: 2-1001
Capture Mode Disabled
Capture VLANs Allowed: ALL
Voice VLAN: none (Inactive)
Appliance trust: none
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:56 ART