From: Loc Pham (ccie17030@yahoo.com)
Date: Wed Jan 10 2007 - 22:06:10 ART
Tim,
I think the ideas will work if you have a multiple
Dynamips that simulate physical networks: say PC with
6 FastE. interfaces , ...
The bottleneck are still ASA, and VPN stuffs ( $$$$
).
I am working on the Security myself and probably
invest on a laptop ( Dual-Core, 2G RAM ) : That will
get some serious network simulation on the road at any
given place !
Have anyone done more practical stuff ??? please
share .
lP
--- Tim <ccie2be@nyc.rr.com> wrote:
> Hi Guys,
>
> I'm preparing for the Security lab but I've been
> noticing these posts
> regarding Dynamips.
>
> As you probably know, if one is going to setup a
> practice lab for security,
> you'll need a firewall, vpn concentrator, an ACS
> server, an IDS and some
> other stuff. This is in addition to a bunch of
> routers and switches.
>
> If Dynamips were to be used to set up a practice
> lab, is there a way to
> connect these other devices to the PC running
> Dynamips such that one could
> simulate a full network?
>
> This would be truly fantastic if possible.
>
> All thoughts and comments are welcomed.
>
> TIA, Tim
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of Henk
> de Tombe
> Sent: Tuesday, January 09, 2007 3:09 AM
> To: Scott Thornton; Cisco certification
> Subject: RE: dynamips/dynagen
>
> Hi Scott,
>
> Try the link below:
>
> http://dyna-gen.sourceforge.net/tutorial.htm
>
> This tutorial is very good!! Have fun with this
> great product.
>
> Regards,
>
>
> Henk
>
> -----Oorspronkelijk bericht-----
> Van: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] Namens Scott
> Thornton
> Verzonden: dinsdag 9 januari 2007 5:18
> Aan: Cisco certification
> Onderwerp: dynamips/dynagen
>
> Can anyone provide me with the steps necessary to
> setup dynamips? I'm
> using
> Windows XP.
>
> I have downloaded dyagen and dynamips. Do you need
> anything else?
> Cygwin?
> I also downloaded a 7200 image to run. I'm just
> confused on how to set
> everything up.
>
> Thanks.
>
> --
> Scott C Thornton
>
> Notice: This e-mail (including attachments) is
> covered by the Electronic
> Communications Privacy Act, 18 U.S.C. 2510-2521, is
> confidential and may
> be
> legally privileged. If you are not the intended
> recipient, you are
> hereby
> notified that any retention, dissemination,
> distribution, or copying of
> this
> communication is strictly prohibited. Please reply
> to the sender that
> you
> have received the message in error, then delete it.
> Thank you.
>
>
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:56 ART