From: anthony.sequeira@thomson.com
Date: Fri Jan 12 2007 - 20:22:50 ART
NOTE: Many of our faithful GroupStudy Question of the Week participants
missed last week's question...be sure to study it carefully - and if in
doubt - of course, lab it up! Thanks again for all of the great feedback
regarding these GroupStudy posts.
LAST WEEK'S ANSWER:
Answer: a
Topic Domain: 4c
Issues:
Here the no auto-summary command is not configured on all the routers -
does it need to be?
Solutions:
The 10.10.10.0/24 network will appear in the routing table of R3. This
is because no auto-summary is configured on R1. Notice that by default
EIGRP
auto-summary is ON for R2 and R3, but since EIGRP performs
auto-summarization on the border routers between two different major
networks and 10.0.0.0/8 subnets are not configured anywhere on R2, R2 is
not a border router for 10.0.0.0/8 or its subnets. R2 will pass the
specific subnet information for 10.10.10.0/24 to R3. However, notice
that 172.16.x.x/24 will be summarized on R2 to 172.16.0.0/16 on the way
to R3.
More Information:
Enhanced Interior Gateway Routing Protocol
http://www.cisco.com/warp/public/103/eigrp-toc.html
LAST WEEK'S QUESTION:
4-11-1. Examine the topology in Exhibit 1 and the configurations shown
in Exhibit 2. How will the route to the Fa0/0 interface of R1 appear on
R3?
a. 10.10.10.0/24
b. 10.10.0.0/16
c. 10.0.0.0/8
d. 10.10.10.1/32
Exhibit 1
10.10.10.1/24--Fa0/0--R1--Fa0/1--172.16.0.1----172.16.0.2--Fa0/0--R2--Fa
0/1--192.168.1.2----Fa0/0--192.168.1.3--R3
Exhibit 2
R1
router eigrp 100
no auto-summary
network 10.0.0.0
network 172.16.0.0
R2
router eigrp 100
network 172.16.0.0
network 192.168.1.0
R3
router eigrp 100
network 192.168.1.0
THIS WEEK'S QUESTION:
2-5-1. Examine the Catalyst switch output shown in Exhibit 1. What
version of VTP is running on this switch?
a. Version 1
b. Version 2
c. Version 3
d. You cannot tell from the command output
Exhibit 1
DSW1#show vtp status
VTP Version : 2
Configuration Revision : 5
Maximum VLANs supported locally : 1005
Number of existing VLANs : 10
VTP Operating Mode : Server
VTP Domain Name : BCMSN
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x0D 0xB4 0x95 0x26 0x26 0xBB 0x0D
0xCA
Configuration last modified by 10.10.1.1 at 8-10-06 11:27:03
Local updater ID is 10.10.1.1 on interface Vl1 (first interface found)
DSW1#
Question of the Week Compliments of:
TESTiT
http://www.netmasterclass.com/site/written.php
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:56 ART