From: Tim Curci (timcurci@adelphia.net)
Date: Tue Feb 20 2007 - 02:42:32 ART
When I try to reconfigure the neighbors manually after reboot I receive the
following:
OSPF: Neighbor command is allowed only on NBMA and point-to-multipoint
networks
i.e. the router will not let me manually configure the neighbors again.
----- Original Message -----
From: "Tim Curci" <timcurci@adelphia.net>
To: <ccielab@groupstudy.com>
Sent: Monday, February 19, 2007 9:48 PM
Subject: Losing manually configured neighbors and virtual links ospf upon
reboot
> Why do I keep losing manually configured neighbors over NBMA frame
> multipoint
> network when I reboot the DR. I have set the priority at 200 on both hub
> subinterfaces. Inverse ARP disabled, etc.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:47 ART