From: Andre Serrao (andreserrao@gmail.com)
Date: Tue Feb 27 2007 - 05:14:54 ART
Hey GS:
I was wondering if there is any trick to have frame-relay inverse-arp to map
L3 address into L2 addresses in a fast way.
I tried shut no shut, but it still takes at least 10 seconds until it
finally works.
Tried changing keepalive from 10 to 2 seconds, just to see if it would make
any difference. However, correct me if I am wrong, keepalive timer only
affects lmi, not frame-relay inarp.
Any ideas to speed it up?
Then, I am trying to understand the datagram size on the debug output. Is
this something configurable?
Thanks,
Andre
Rack1R3#debug frame-relay packet
Frame Relay packet debugging is on
Rack1R3#
*Mar 2 10:05:19.011: Serial0/1: broadcast search
*Mar 2 10:05:19.011: Serial0/1:encaps failed on broadcast for link 7(IP)
Rack1R3#
*Mar 2 10:05:22.775: Serial0/1: broadcast search
*Mar 2 10:05:22.775: Serial0/1:encaps failed on broadcast for link 7(IP)
Rack1R3#
*Mar 2 10:05:26.203: Serial0/1: broadcast search
*Mar 2 10:05:26.203: Serial0/1:encaps failed on broadcast for link 7(IP)
*Mar 2 10:05:26.615: Serial0/1:Encaps failed--no map entry link 7(IP)
Rack1R3#
*Mar 2 10:05:28.167: Serial0/1:Encaps failed--no map entry link 7(IP)
*Mar 2 10:05:28.615: Serial0/1:Encaps failed--no map entry link 7(IP)
Rack1R3#
*Mar 2 10:05:30.115: Serial0/1: broadcast search
*Mar 2 10:05:30.115: Serial0/1:encaps failed on broadcast for link 7(IP)
Rack1R3#
Rack1R3#
*Mar 2 10:05:32.615: Serial0/1:Encaps failed--no map entry link 7(IP)
Rack1R3#
*Mar 2 10:05:33.783: Serial0/1: broadcast search
*Mar 2 10:05:33.783: Serial0/1:encaps failed on broadcast for link 7(IP)
*Mar 2 10:05:34.079: Serial0/0.302: broadcast search
*Mar 2 10:05:34.083: Serial0/0.302(o): dlci 302(0x48E1), NLPID 0x3CC(IP),
datagramsize 116
*Mar 2 10:05:34.095: broadcast dequeue
*Mar 2 10:05:34.095: Serial0/0.302(o):Pkt sent on dlci 302(0x48E1),
NLPID 0x3CC(IP), datagramsize 116
Rack1R3#
*Mar 2 10:05:37.295: Serial0/1: broadcast search
*Mar 2 10:05:37.295: Serial0/1:encaps failed on broadcast for link 7(IP)
*Mar 2 10:05:37.635: Serial0/0(i): dlci 302(0x48E1), NLPID 0x3CC(IP),
datagramsize 316
Rack1R3#
*Mar 2 10:05:39.279: Serial0/0.302: broadcast search
*Mar 2 10:05:39.279: Serial0/0.302(o): dlci 302(0x48E1), NLPID 0x3CC(IP),
datagramsize 58
*Mar 2 10:05:39.295: broadcast dequeue
*Mar 2 10:05:39.295: Serial0/0.302(o):Pkt sent on dlci 302(0x48E1),
NLPID 0x3CC(IP), datagramsize 58
Rack1R3#
*Mar 2 10:05:40.615: Serial0/1:Encaps failed--no map entry link 7(IP)
*Mar 2 10:05:41.111: Serial0/1: broadcast search
*Mar 2 10:05:41.111: Serial0/1:encaps failed on broadcast for link 7(IP)
Rack1R3#
*Mar 2 10:05:45.031: Serial0/1: broadcast search
*Mar 2 10:05:45.031: Serial0/1:encaps failed on broadcast for link 7(IP)
*Mar 2 10:05:45.159: Serial0/0.302(o): dlci 302(0x48E1), NLPID 0x3CC(IP),
datagramsize 82
*Mar 2 10:05:45.207: Serial0/0.302: Broadcast on DLCI 302 link 65(CDP)
*Mar 2 10:05:45.207: Serial0/0.302(o): dlci 302(0x48E1), pkt encaps 0x0300
0x8000 0x0000 0x2000(CDP), datagramsize 353
*Mar 2 10:05:45.299: broadcast dequeue
*Mar 2 10:05:45.299: Serial0/0.302(o):Pkt sent on dlci 302(0x48E1), pkt
encaps 0x300 0x8000 0x0 0x2000(CDP), datagramsize 353
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:48 ART