From: Marut S@MS@DCTH-BKK (S@MS@DCTH-BKK)
Date: Mon Mar 05 2007 - 03:06:49 ART
Hi All,
Refer to hyperlink below.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hw
an_r/wan_f1h.htm#wp1071875
Usage Guidelines
Frame Relay DE group functionality is supported on process-switched
packets only.
Does it mean that I have to turn off cef and fast-swtiching (
no-ip route-cache ).
interface Serial0/0
encapsulation frame-relay
no ip route-cache cef
no ip route-cache
frame-relay de-group 1 601
Rack03R6(config-if)#no ip route-cache ?
cef Enable Cisco Express Forwarding
flow Enable Flow fast-switching cache
policy Enable fast-switching policy cache for outgoing
packets
same-interface Enable fast-switching on the same interface
Or would it be safer it I use set fr-de? Because this command
has no restriction with switching process. May be this interface must
use cef as ip verify unicast reverse or nbar should be run
simultaneously
policy-map set-de
class class-default
set fr-de
int s0/0
service-policy output set-de
Or what I understand is completely wrong. Please help me to
clarify this issue.
Many thanks in advance,
Maruto
****************************************************************************
This email and all contents are subject to the following disclaimer:
http://www.datacraft-asia.com/disclaimer
****************************************************************************
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:50 ART