From: Shamin (ccie.xpert@gmail.com)
Date: Mon Mar 05 2007 - 12:26:25 ART
Hi,
The routers used are:
R3 --  3640 (C3640-JS-M), Version 12.4(7)
R4 --  2611 (C2600-J1S3-M), Version 12.3(6)
R5 --  2611 (C2600-J1S3-M), Version 12.3(15)
Can this be an issue with the IOS?
Regards
Shamin
On 3/5/07, Darby Weaver <darbyweaver@yahoo.com> wrote:
>
> Shamin,
>
> Which version of IOS and model of router are you
> using?
>
> Curious, I'll try this this afternoon when I make it
> home.
>
> Darby
> --- Shamin <ccie.xpert@gmail.com> wrote:
>
> > Hi All,
> >
> > First of all Darby, I have tried the setup without
> > PPPover FR and everything
> > works perfectly fine.
> > Updates are received throughout. So here there is no
> > issue of the neighbor
> > command I suppose.
> > Output on R4 for eigrp neibhors with EIGRP over PPP
> > over Frame is as below.
> >
> > Rack1R4#sh ip eigrp neighbors
> > IP-EIGRP neighbors for process 10
> > H   Address                 Interface       Hold
> > Uptime   SRTT   RTO  Q  Seq
> >                                             (sec)
> >      (ms)       Cnt Num
> >
> > 0   158.1.44.3              Vi1               11
> > 00:00:34    1  3000  0  16
> >
> >
> > I tried to disable PPP authentication on all three
> > routers and still had the
> > same problem.
> > I did some of the debug eigrp packets command on R4
> > and could see that there
> > are HELLO, UPDATE and ACK packets being exchanged
> > between R4 & R3. But R4
> > does not receive any
> > EIGRP routes from R3. But R3 receives the Loopback
> > of R4.
> >
> > As antonio mentioned , I tried with two
> > Virtual-templates on R3. The Eigrp
> > adjacency were formed but still had the same issue.
> > Tried disabling
> > "split-horizon" on the Virtual-Template on R3, this
> > also did not help.
> >
> > At last I removed the PPPover Frame config and did
> > normal EIGRP over Frame
> > and everything seems to work perfectly. I still cant
> > get the reason for this
> > kind of one way update between R3 and R4 i.e R3 is
> > receiving R4's Loopback
> > route whereas R4 does not receive R3's loopback
> > route.
> >
> > Regards and thanks
> > shamin
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
> ================================================
> =             Darby Weaver                     =
> ================================================
> =      CCNP, CCDP, CCSP, CCNA, CCDA            =
> =   CQS: Unity Support, CQS: IPCC Express      =
> =       Cisco Wireless LAN SE/FE               =
> =    RSFS/SS RSAM ARSFE/AM RSSS CSA/CSE        =
> =    NSA/CNSS 4013 Recognition, INFOSEC        =
> =   MCT ,MCSA 2003, MCSE 2000: Messaging       =
> =      MCSA: Messaging, MCSE+I, MCP+I          =
> =         CEH | CCEA | A+ N+ I+                =
> =                                              =
> ================================================
> =**********************************************=
> ================================================
> =  Location:   Central Florida, USA            =
> =  Phone:      407-802-7394                    =
> =  Email:      darbyweaver <at> yahoo <.> com  =
> ================================================
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:50 ART