From: Kim (support@isolvesystems.com)
Date: Tue Mar 06 2007 - 12:29:08 ART
It works now by adding the network statement in R2. Is there any way I can
have R5 and R6 peer directly with each other without R2 having the network
statement?
Thanks.
Kim
On 3/6/07, Jim <firstnamejim@gmail.com> wrote:
>
> Did you try to add this in R2?
>
> router eigrp 10
> netowrk 150.50.100.0 0.0.0.255
>
> I think it was just R2 (hub) missing the eigrp network statement.
>
> On 3/6/07, Kim <support@isolvesystems.com> wrote:
> >
> > R2(config-router)#do sh run | be router
> > router eigrp 10
> > network 150.50.9.0 0.0.0.255
> > network 150.50.24.2 0.0.0.0
> > network 200.0.0.2 0.0.0.0
> > no auto-summary
> > R2#sho run int s0/0/0.256
> > Building configuration...
> >
> > Current configuration : 207 bytes
> > !
> > interface Serial0/0/0.256 multipoint
> > ip address 150.50.100.2 255.255.255.192
> > frame-relay map ip 150.50.100.5 205 broadcast
> > frame-relay map ip 150.50.100.6 206 broadcast
> > no frame-relay inverse-arp
> > end
> >
> >
> > R5#sho run | be router
> > router eigrp 10
> > network 150.50.9.0 0.0.0.255
> > network 150.50.100.5 0.0.0.0
> > network 200.0.0.5 0.0.0.0
> > no auto-summary
> > neighbor 150.50.100.6 Serial0/0/0
> > interface Serial0/0/0
> > ip address 150.50.100.5 255.255.255.192
> > encapsulation frame-relay
> > no ip route-cache cef
> > no ip route-cache
> > ip ospf network point-to-multipoint
> > ip ospf priority 0
> > no fair-queue
> > frame-relay map ip 150.50.100.2 502 broadcast
> > frame-relay map ip 150.50.100.6 502 broadcast
> > no frame-relay inverse-arp
> > end
> >
> > R6(config-router)#do sh run | be router
> > router eigrp 10
> > redistribute rip metric 1000 10 200 10 1500
> > redistribute ospf 1 metric 1000 10 200 10 1500
> > network 150.50.100.6 0.0.0.0
> > network 200.0.0.6 0.0.0.0
> > no auto-summary
> > neighbor 150.50.100.5 Serial0/0/0
> > !
> > interface Serial0/0/0
> > ip address 150.50.100.6 255.255.255.192
> > encapsulation frame-relay
> > ip ospf network point-to-multipoint
> > ip ospf priority 0
> > no fair-queue
> > frame-relay map ip 150.50.100.2 602 broadcast
> > frame-relay map ip 150.50.100.5 602 broadcast
> > no frame-relay inverse-arp
> > end
> >
> >
> > On 3/6/07, Tony Schaffran < groupstudy@cconlinelabs.com> wrote:
> > >
> > > It may help to see your EIGRP and interface configs.
> > >
> > >
> > > Tony Schaffran
> > > Network Analyst
> > > CCIE #11071
> > > CCNP, CCNA, CCDA,
> > > NNCDS, NNCSS, CNE, MCSE
> > >
> > > www.cconlinelabs.com
> > > Your #1 choice for online Cisco rack rentals.
> > >
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> > Of
> > > Kim
> > > Sent: Tuesday, March 06, 2007 6:37 AM
> > > To: Cisco certification
> > > Subject: EIGRP Neighbor statement over Frame Relay
> > >
> > > R2, R5, R6 are connected over Frame Relay Cloud. I have broadcast
> > turned
> > > on,
> > > but I can't get them peer with each other without EIGRP neighbor
> > > statement.
> > > Any idea why?
> > >
> > > R2
> > > Serial0/0/0.256 (up): ip 150.50.100.5 dlci 205(0xCD,0x30D0), static,
> > > broadcast,
> > > CISCO, status defined, active
> > > Serial0/0/0.256 (up): ip 150.50.100.6 dlci 206(0xCE,0x30E0), static,
> > > broadcast,
> > > CISCO, status defined, active
> > >
> > > R5
> > > Serial0/0/0 (up): ip 150.50.100.2 dlci 502(0x1F6,0x7C60), static,
> > > broadcast,
> > > CISCO, status defined, active
> > > Serial0/0/0 (up): ip 150.50.100.6 dlci 502(0x1F6,0x7C60), static,
> > > broadcast,
> > > CISCO, status defined, active
> > >
> > > R6
> > > Serial0/0/0 (up): ip 150.50.100.2 dlci 602(0x25A,0x94A0), static,
> > > broadcast,
> > > CISCO, status defined, active
> > > Serial0/0/0 (up): ip 150.50.100.5 dlci 602(0x25A,0x94A0), static,
> > > broadcast,
> > > CISCO, status defined, activ
> > >
> > >
> > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:50 ART