From: Edward Norton (doubleccie@yahoo.com)
Date: Sat Mar 10 2007 - 10:51:26 ART
get this guys ..after 1 of troubleshooting ..finaly downgrading the software from 12.3 (IP/IPSec..etc) to 12.2 (IP plus only) did solve the problem..the router ping normally now ..i do not know what is that suppose to mean :) ..but happy it worked
thx for all the contribution
Quetta Walla <quetta_1@lycos.com> wrote:
Dont see command to put switch port where router is connected in vlan 7.
like: switchport mode access
switchport access vlan 7
.a router (3620) connected to switch and im trying to ping from the router to the switch vlan interface , for some unknown reason .. ping is not successful ...configuration on the router is very simple as
!
interface FastEthernet0/1
ip address 20.1.23.2 255.255.255.0
duplex auto
speed auto
!
on the switch
!
interface Vlan7
ip address 20.1.23.8 255.255.255.0
!
interfaces are UP ...vlan is configured properly .
when i did debug to see why it is not pinging ..i got an encasultion failure ..routed via RIB ...wat is that ???
*Mar 1 00:17:35.207: IP: s=20.1.23.2 (local), d=20.1.23.8 (FastEthernet0/1), le
n 100, encapsulation failed
*Mar 1 00:17:35.207: ICMP type=8, code=0.
*Mar 1 00:17:37.207: IP: tableid=0, s=20.1.23.2 (local), d=20.1.23.8 (FastEther
net0/1), routed via RIB
*Mar 1 00:17:37.207: IP: s=20.1.23.2 (local), d=20.1.23.8 (FastEthernet0/1), le
n 100, sending
*Mar 1 00:17:37.207: ICMP type=8, code=0
*Mar 1 00:17:37.207: IP: s=20.1.23.2 (local), d=20.1.23.8 (FastEthernet0/1), le
n 100, encapsulation failed
*Mar 1 00:17:37.207: ICMP type=8, code=0.
Success rate is 0 percent (0/5)
any help is appreciated
ReGaRdS
---------------------------------
Don't be flakey. Get Yahoo! Mail for Mobile and
always stay connected to friends.
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:50 ART