From: Huang Laurence (huangyinxiao@gmail.com)
Date: Mon Mar 12 2007 - 20:18:44 ART
Hi xuyi,
As far as I know, if you configure RSVP on the subinterface, firstly you
should garantee that physical interface reserve enough bandwidth for
subinterface. Am I right?
Cheers,
Laurence
On 12/03/07, iyux2000@gmail.com <iyux2000@gmail.com> wrote:
>
> Hello group,
>
> I have serveral questions about configuring RSVP.
>
> 1. For configuring RSVP over FR, is only one command "ip rsvp
> bandwidth" enough to enable RSVP? Do i need to enable "traffic-shaping".
> 2. If need to configure RSVP under subinterfaces, which commands are
> needed?
> 3. If topology is as follows:
> R1(multipoint)
> / \
> / \
> R2 R3
> (p-to-p) (p-to-p)
>
> Do i need to configure RSVP on every interface?
> Or only enablint RSVP on R1 multipoint interface?
>
> Thank you for your reply.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:51 ART