From: ruth wainwright (ruthwainwright@yahoo.com.au)
Date: Fri Mar 23 2007 - 07:43:14 ART
Does this help?
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t2/ipv6/ftipv6c.htm
In IPv4, the Inverse Address Resolution Protocol (Inverse ARP) is used to dynamically map the network-layer address of a node at the far end of a PVC to that PVC. Refer to the "Configuring ATM" and "Configuring Frame Relay" chapters of the Release 12.2, Cisco IOS Wide-Area Networking Configuration Guide publication for information on configuring Inverse ARP. In IPv6, Inverse Neighbor Discovery is used to dynamically map the global IPv6 address of a node at the far end of a PVC to that PVC.
Ruth
----- Original Message ----
From: Bit Gossip <bit.gossip@chello.nl>
To: ccielab@groupstudy.com
Sent: Friday, 23 March, 2007 9:53:48 AM
Subject: fr-inarp for IPv6
Hi group,
I could't find explicit mention in the DOCcD, but it looks like fr inarp
doesn't support IPv6. Is my understanding correct?
Thanks,
Luca.
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:52 ART