From: Keith Bizzell (mkbcoolman@gmail.com)
Date: Tue Mar 27 2007 - 19:09:27 ART
Maybe I'm sleep deprived, but I can't figure this out to save my life.
HELP!!!
interface Serial0/1/0
ip address 163.1.13.1 255.255.255.0
encapsulation ppp
ip ospf network non-broadcast
ip ospf priority 100
ppp authentication pap
ppp pap sent-username Rack1R1 password 0 CISCO
end
Rack1R1(config-router)#do show ip os int s0/1/0
Serial0/1/0 is up, line protocol is up
Internet Address 163.1.13.1/24, Area 1
Process ID 1, Router ID 150.1.1.1, Network Type NON_BROADCAST, Cost: 64
Transmit Delay is 1 sec, State DR, Priority 100
Designated Router (ID) 150.1.1.1, Interface address 163.1.13.1
No backup designated router on this network
Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5
oob-resync timeout 120
Hello due in 00:00:22
Supports Link-local Signaling (LLS)
Index 1/4, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 0, maximum is 0
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 0, Adjacent neighbor count is 0
Suppress hello for 0 neighbor(s)
Rack1R1(config-router)#neigh 163.1.13.3
OSPF: Neighbor command is allowed only on NBMA and point-to-multipoint
networks
Rack1R1(config-router)#
Why would I see this?
Thanks in advance - Keith
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:53 ART