Re: OSPF over ASA transparent mode

From: Brandon Bennett (bennetb@gmail.com)
Date: Wed Apr 11 2007 - 19:18:17 ART

• Next message: anthony.sequeira@thomson.com: "RE: OSPF over ASA transparent mode"
• Previous message: Brian Dennis: "Re: OSPF stuck in Exstart phase -- due to MTU mismatch --"
• Maybe in reply to: nem chua: "OSPF over ASA transparent mode"
• Next in thread: anthony.sequeira@thomson.com: "RE: OSPF over ASA transparent mode"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

anthony.sequeira@thomson.com wrote:
> The following features are not supported in Transparent Mode:
>
> * DYNAMIC ROUTING PROTOCOLS
> * NAT
> * IPv6
> * DHCP Relay
> * QoS
> * Multicast
> * VPN Termination for Through Traffic
>
> Anthony J Sequeira
> #15626
>

I believe he is doing OSPF _through_ the ASA not to it. OSPF is not
supported running on the ASA in transparent mode, although you should be
able to run OSPF through it.

Try debug ospf packets on each of the routers. If i had a guess I
would say MTU mismatch.

~Brandon Bennett

• Next message: anthony.sequeira@thomson.com: "RE: OSPF over ASA transparent mode"
• Previous message: Brian Dennis: "Re: OSPF stuck in Exstart phase -- due to MTU mismatch --"
• Maybe in reply to: nem chua: "OSPF over ASA transparent mode"
• Next in thread: anthony.sequeira@thomson.com: "RE: OSPF over ASA transparent mode"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:35 ART