From: Mustafa Bayramov (mbayramo@cisco.com)
Date: Tue Apr 17 2007 - 13:24:24 ART
Folks,
Anyone faced with following issue with MPLS ?
EIGRP between CE1-PE1 and EIGRP between CE2-PE2.
CE1 advertise default route and PE1 redistribute all learned route to X VRF
to BGP , PE2 receive all prefix for X VRF and redistribute to EIGRP process.
PE2 see default route in BGP table and routing table for VRF X.
But I don't see default route in EIGRP topology and don't see it in debug
output of eigrp.
I was able to fix this issue by using different EIGRP AS number between
CE-PE1 and CE-PE2 in other word before that all AS number was same in MBGP
and EIGRP on both side and customer side.
Many thanks.
Mustafa Bayramov
Systems Engineer,
CCIE,CISSP
This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:36 ART