From: Router Girl (ciscoroutergirl@gmail.com)
Date: Mon May 14 2007 - 20:51:37 ART
I am not sure that is what Sirus is trying to do. Looks like he wants to
keep L3 and not go with a bridge (L2) between the two vlans. If the boxes
are windows boxes, you can also put the NETBIOS names statically in the
LMHOSTS file.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Edison Ortiz
Sent: Monday, May 14, 2007 4:45 PM
To: sirus MOGHADASIAN; Cisco certification
Subject: Re: ip helper-address issue
This may help
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12225see/scg/swf
allbk.htm
----- Original Message -----
From: "sirus MOGHADASIAN" <cyrus.mgh@gmail.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Monday, May 14, 2007 7:29 PM
Subject: ip helper-address issue
> Hi group,
>
> I have a L3 switch, and have two vlan on it each with on host.
>
> is there a way that hosts see each other NETBIOS name?
> which address I should type for Ip helper-address?
>
>
> Thanks
>
> Sirus Moghadasian
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:21 ART