From: Zafar Khan (mahaguru@gmail.com)
Date: Tue May 15 2007 - 03:48:02 ART
Never tried that "conversion " though, but the doc says its
comes/support only CAT OS.
http://cisco.com/en/US/products/hw/switches/ps606/products_data_sheet09186a0080092682.html
I dont know if it helps you, but WS-2948G-L3 does have IOS .
' HTH
Zafar khan
CCIE # 16999
On 5/15/07, Radioactive Frog <pbhatkoti@gmail.com> wrote:
> Gang,
> Sorry for OT.
>
> Does anyone know if Cisco IOS is available for WS-C2948G model of gigabit
> switch. Is it possible to covert cat-os to Cisco's standard IOS for this
> model of switch ?
>
> The shipped IOS is like CAT-IOS based commands.
> Thanks
>
> Console> (enable)
> Console> (enable) show ver
> WS-C2948 Software, Version NmpSW: 4.5(9)
> Copyright (c) 1995-2000 by Cisco Systems, Inc.
> NMP S/W compiled on Sep 28 2000, 15:48:46
> GSP S/W compiled on Sep 28 2000, 15:02:24
>
> System Bootstrap Version: 5.4(1)
>
> Hardware Version: 2.3 Model: WS-C2948 Serial #: JAE0508023M
>
> Mod Port Model Serial # Versions
> --- ---- ---------- -------------------- ---------------------------------
> 1 0 WS-X2948 JAE0508023M Hw : 2.3
> Gsp: 4.5(9.0)
> Nmp: 4.5(9)
> 2 50 WS-C2948G JAE0508023M Hw : 2.3
>
> DRAM FLASH NVRAM
> Module Total Used Free Total Used Free Total Used Free
> ------ ------- ------- ------- ------- ------- ------- ----- ----- -----
> 1 65536K 16599K 48937K 12288K 3801K 8487K 480K 90K 390K
>
> Uptime is 0 day, 0 hour, 2 minutes
> Console> (enable)
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:21 ART