From: Brad Ellis (brad@ccbootcamp.com)
Date: Thu May 17 2007 - 15:33:59 ART
Also, don't forget to double check your config registers...make sure they
are 0x2102 on your routers! :)
thanks,
Brad Ellis
CCIE#5796 (R&S / Security)
CCSI#30482
Network Learning Inc - A Cisco Sponsored Organization (SO)
YES! We take Cisco Learning credits!
brad@ccbootcamp.com
www.ccbootcamp.com (Cisco Training and Advanced Technology Rental Racks)
Voice: 702-968-5100
FAX: 702-446-8012
----- Original Message -----
From: "Brian Dennis" <bdennis@internetworkexpert.com>
To: "cisco monster" <cisco.monster@gmail.com>; <ccielab@groupstudy.com>
Sent: Thursday, May 17, 2007 11:20 AM
Subject: Re: in Lab , reload !!
Look at it this way. If your configurations (solutions) will not survive a
reload you more than likely won't pass anyways. Your configurations should
be able to survive a reload.
--Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP) bdennis@internetworkexpert.com
Internetwork Expert, Inc. http://www.InternetworkExpert.com Toll Free: 877-224-8987 Direct: 775-745-6404 (Outside the US and Canada)
On 5/16/07 12:25 AM, "cisco monster" <cisco.monster@gmail.com> wrote:
> Hello friends , > > I want to know that , should I reload all routers n switch after finishing > lab ? To check that its working after reload or not !! And another thing > is > that does Mr proctor reload bfore check my config ? > > Thanx > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:21 ART