From: Cacca Mucca (caccamucca@gmail.com)
Date: Mon May 21 2007 - 16:18:08 ART
Format flash and then reload. That always works.
On 5/21/07, Marvel, Michael (US - Hermitage) <mmarvel@deloitte.com> wrote:
>
> On a router you could do a CONFIGURE REPLACE.
>
> So, if you have a config saved on Flash (including your Startup-config),
> you can replace your running config with that without a reboot. I'd
> agree with the others about a switch though due to VLANs... Delete
> VLAN.dat and reload.
>
> -----Original Message-----
> From: Rob McDonald [mailto:robmexpert@gmail.com]
> Sent: Sunday, May 20, 2007 7:54 PM
> To: Cisco certification
> Subject: Removing running-config
>
> What is the quickest way in case if I want to remove everything from
> running-config and want to reload the router/switch with no config on
> it.
>
> delete running-config
> reload
>
> ????
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> This message (including any attachments) contains confidential information
> intended for a specific individual and purpose, and is protected by law. If
> you are not the intended recipient, you should delete this message.
>
>
> Any disclosure, copying, or distribution of this message, or the taking of
> any action based on it, is strictly prohibited. [v.E.1]
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:21 ART