From: laidlaw@consecro.com
Date: Fri May 25 2007 - 20:51:14 ART
I have two routers, r1 and r2. They are directly connected via
ethernet, say subnet 1.1.12.0/24 and they each have a loopback,
1.1.0.1/32 and 1.1.0.2/32 respectively. Both the ethernet and
loopbacks are going to be in area 0. Now the requirement is to have a
minimal ospf database, specifically, no net lsa's. The loopbacks must
be advertised to the adjacent router because they are going to used for
bgp peering.
I have tried the interface ospf database-filter command, which did
remove the net lsa's, and even though the routers became neighbors, the
loopbacks were no advertised. is there a way to convert the type 2 to
another type without changing the areas of the interfaces?
Thanks
-Rob
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:22 ART