From: Ivan (ivan@iip.net)
Date: Mon Jul 09 2007 - 12:11:57 ART
auto-rp-listener command applied if you use "ip pim sparse-mode" command under
interface. If you use ip pim sparse-dense-mode, there is no need to use this
command.
Auto-rp-listener force Auto-RP groups (224.0.0.39/40) to operate in dense mode
during this forbiden by other configuration.
On Monday 09 July 2007 18:38, Amit Kohli wrote:
> Hi
>
> In multicast, if I have the below configuration
>
>
> ip pim auto-rp listener (On every Router)
> no ip pim dm-fallback (On every Router)
> ip pim send-rp-announce loopback0 scope 16
> ip pim send-rp-discovery loopback0 scope 16
> int lo0
> ip pim sparse-dense-mode
>
>
> In the above configuration all the routers will work in sparse mode or
> dense mode?
>
> Does the command " ip pim sparse-dense-mode" takes precedence over the
> command " ip pim auto-rp-listener" ?
>
> Thanks
> Amit
>
>
>
>
>
>
> ---------------------------------
> Moody friends. Drama queens. Your life? Nope! - their life, your story.
> Play Sims Stories at Yahoo! Games.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:40 ART