From: viny gm (vinygm@gmail.com)
Date: Sun Jul 29 2007 - 12:30:12 ART
Here is show diag
2nd generation - FXO Voice daughter card (4 port)
Hardware Revision : 5.0
Top Assy. Part Number : 800-21589-02
Board Revision : A0
Deviation Number : 0-0
Fab Version : 04
PCB Serial Number : FOC10440NZ9
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : VIC2-4FXO
Version Identifier : V01
CLEI Code : CNUIAPRAAA
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 00 4C 41 05 00 C0 46 03 20 00 54 55 02
0x10: 42 41 30 80 00 00 00 00 02 04 C1 8B 46 4F 43 31
0x20: 30 34 34 30 4E 5A 39 03 00 81 00 00 00 00 04 00
0x30: CB 89 56 49 43 32 2D 34 46 58 4F 89 56 30 31 20
0x40: C6 8A 43 4E 55 49 41 50 52 41 41 41 FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
viny
On 7/29/07, wilfred d'souza <wilfred_thegr8@yahoo.co.in> wrote:
>
> can u also paste the show diag?
>
> *viny gm <vinygm@gmail.com>* wrote:
>
> Debug error msg
> ----------------------
> get_fxo_caller_id:Caller ID receive failed. parseCallerIDString:no data.
>
>
> config
> --------------
> voice-port 0/1/0
> cptone GB
> timeouts call-disconnect 3
> timeouts wait-release 3
> connection plar opx 300
> impedance complex2
> caller-id enable
> !
> voice-port 0/1/1
> cptone GB
> timeouts call-disconnect 3
> timeouts wait-release 3
> connection plar opx 300
> impedance complex2
> caller-id enable
> !
> voice-port 0/1/2
> cptone GB
> timeouts call-disconnect 3
> timeouts wait-release 3
> connection plar opx 300
> impedance complex2
> caller-id enable
> !
> voice-port 0/1/3
> cptone GB
> timeouts call-disconnect 3
> timeouts wait-release 3
> connection plar opx 300
> impedance complex2
> caller-id alerting dsp-pre-allocate
>
>
> dial-peer voice 200 voip
> tone ringback alert-no-PI
> translation-profile outgoing addinPrefix
> preference 1
> destination-pattern 3..
> voice-class h323 1
> session target ipv4:xx.xx.xx.xx
> dtmf-relay h245-alphanumeric
> codec g711ulaw
> no vad
>
> dial-peer voice 100 pots
> preference 1
> destination-pattern 9[2-9]......
> port 0/1/0
> !
> dial-peer voice 101 pots
> destination-pattern 9[2-9]......
> port 0/1/1
> !
> dial-peer voice 102 pots
> destination-pattern 9[2-9]......
> port 0/1/2
> !
> dial-peer voice 103 pots
> destination-pattern 9[2-9]......
>
> Viny
>
>
> On 7/29/07, wilfred d'souza <wilfred_thegr8@yahoo.co.in> wrote:
> >
> > Also your FXO Interface needs to be VIC-2FXO-M1 or VIC-2FXO-M2 for
> > Caller ID Support.
> >
> > Wilfred
> >
> > *Mark Snow <msnow@ipexpert.com> *wrote:
> >
> > Two things - 1 are you using MGCP? While the gateway clearly does
> > support Caller ID and FXO, CallManager only supports it through H323
> > signaling. Also be sure that your FXO port has the "caller-id enable"
> > config on it.
> >
> > Mark Snow
> > Sr Technical Instructor
> > IPexpert, Inc.
> >
> > Sent from my iPhone
> >
> > On Jul 29, 2007, at 7:00 AM, "viny gm" wrote:
> >
> > > Hi,
> > >
> > >
> > >
> > > I am getting a problem regarding caller id my FXO port is not
> > > forwarding the
> > > caller id to IP phone. When I am using same phone line with analog
> > > phone the
> > > caller id is coming on that
> > >
> > >
> > >
> > > Can any body help on this regards
> > >
> > >
> > >
> > > Viny
> > >
> > >
> > _______________________________________________________________________
> >
> >
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > ------------------------------
> > Yahoo! Movies<http://sg.rd.yahoo.com/mail/sg/footer/def/*http://sg.movies.yahoo.com>- Search movie info and celeb profiles and photos.
> >
>
>
> ------------------------------
> Yahoo! Movies<http://sg.rd.yahoo.com/mail/sg/footer/def/*http://sg.movies.yahoo.com>- Search movie info and celeb profiles and photos.
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:42 ART