From: CCIE 19999 (ccie@iprimus.com.au)
Date: Sun Jul 29 2007 - 23:08:49 ART
Greg,
The problem with s hip nbar pport-map is that this does not provide the
complete list of port numbers. This list shows, only the port numbers that
nbar uses. For example, if you loo for the port number for radius, tacacs,
etc you wouldn't find them in the nbar port-map list.
The list is more comprehensive in the link provided by Digital.
My 2cents,
Shine
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Greg
Wendel
Sent: Monday, 30 July 2007 11:12 AM
To: Digital Yemeni
Cc: Toh Soon, Lim; ccielab@groupstudy.com
Subject: Re: Are TCP/UDP port numbers found on DocCD?
Here is another way using nbar.
Rack1R1#sh ip nbar port-map
port-map bgp                      udp 179
port-map bgp                      tcp 179
port-map citrix                   udp 1604
port-map citrix                   tcp 1494
port-map cuseeme                  udp 7648 7649 24032
port-map cuseeme                  tcp 7648 7649
port-map dhcp                     udp 67 68
port-map dns                      udp 53
port-map dns                      tcp 53
port-map edonkey                  tcp 4662
port-map exchange                 tcp 135
port-map fasttrack                tcp 1214
port-map finger                   tcp 79
port-map ftp                      tcp 21
port-map gnutella                 tcp 6346 6347 6348 6349 6355 5634
port-map gopher                   udp 70
port-map gopher                   tcp 70
port-map h323                     udp 1300 1718 1719 1720 11720
port-map h323                     tcp 1300 1718 1719 1720 11000 - 11999
port-map http                     tcp 80
port-map imap                     udp 143 220
port-map imap                     tcp 143 220
port-map irc                      udp 194
 --More--
On 7/29/07, Digital Yemeni <digital.yemeni@gmail.com> wrote:
>
> You can look it up on the ASA command ref. on the DocCD.
>
>
http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/ports
.html
>
> On 7/30/07, Toh Soon, Lim <tohsoon28@gmail.com> wrote:
> >
> > Hi,
> >
> > I wonder if we can find any TCP or UDP port numbers information on
> > the DocCD.
> >
> > In case I'm asked to configure ACLs and I need to look up the port
> > numbers.
> >
> >
> > Thank you.
> >
> > B.Rgds,
> > Lim TS
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
>
> --
> Best Regards
>
> Digital, CCIEx1 (4 more to go! a 10 years project! SP in progress...)
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Gregory Wendel Springfield VA, 22153
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:42 ART