From: ISolveSystems (support@isolvesystems.com)
Date: Tue Jul 31 2007 - 13:18:12 ART
Hi Experts,
I get the following error when applying FRTS with priority queing to a FR
interface. I have the bandwidth set to 5600000k, but I got the following
error. I have also configured the max reserved bandwidth to 100%.
Rack1R1(config-if)#frame-relay cla FRTS
I/f Serial1/1 DLCI 103 class AUDIOUDP requested bandwidth 128 (kbps),
available only 28 (kbps)
class-map match-all AUDIOUDP
match access-group 100
!
!
policy-map AUDIOUDP
class AUDIOUDP
priority 128 8000
class class-default
map-class frame-relay FRTS
service-policy output AUDIOUDP
!
access-list 100 permit udp any any eq 7070
interface Serial1/1
bandwidth 5600000
no ip address
encapsulation frame-relay
shutdown
serial restart-delay 0
no dce-terminal-timing-enable
no fair-queue
frame-relay traffic-shaping
frame-relay map ip 1.1.1.1 103
max-reserved-bandwidth 100
end
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:42 ART