From: Joe Carr (Enventis) (jcarr@enventis.com)
Date: Tue Jul 31 2007 - 14:04:56 ART
I have never heard of the VIC-2FXO-M1. The only 2 port FXO card that
Cisco sells right now is the VIC2-2FXO.
Joe
_____________________________________________
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
wilfred d'souza
Sent: Sunday, July 29, 2007 10:08 AM
To: Mark Snow; viny gm
Cc: ccielab@groupstudy.com; Mark Snow
Subject: Re: FXO Caller ID prb
Also your FXO Interface needs to be VIC-2FXO-M1 or VIC-2FXO-M2 for
Caller ID Support.
Wilfred
Mark Snow <msnow@ipexpert.com> wrote: Two things - 1 are you using MGCP?
While the gateway clearly does
support Caller ID and FXO, CallManager only supports it through H323
signaling. Also be sure that your FXO port has the "caller-id enable"
config on it.
Mark Snow
Sr Technical Instructor
IPexpert, Inc.
Sent from my iPhone
On Jul 29, 2007, at 7:00 AM, "viny gm" wrote:
> Hi,
>
>
>
> I am getting a problem regarding caller id my FXO port is not
> forwarding the
> caller id to IP phone. When I am using same phone line with analog
> phone the
> caller id is coming on that
>
>
>
> Can any body help on this regards
>
>
>
> Viny
>
>
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:42 ART