From: NITIN NITIN (ccie_study_123@yahoo.com)
Date: Sat Aug 04 2007 - 10:32:54 ART
Hi Experts,
Please Suggest
When I put bridge-group 1 on broadcast meadia ,,,,, on SWitch ping stops t that
interface ........I'm trying this on DYNAMIPS
Rack1SW2#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Rack1SW2(config)#int vlan 23
Rack1SW2(config-if)# bridge-group 1
Rack1SW2(config-if)#^Z
Rack1SW2#
*Mar 1 00:04:06.599: %SYS-5-CONFIG_I: Configured from console by console
Rack1SW2#
*Mar 1 00:04:08.519: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.2.2 on Vlan23 from DOWN to DOWN, Neighbor Down: Ignore timer expired
Rack1R2#ping 173.1.23.8
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 173.1.23.8, timeout is 2 seconds:
.....
Success rate is 20 percent (1/5), round-trip min/avg/max = 48/48/48 ms
AFTER REMOVING BRIDGE-GROUP
Rack1SW2#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Rack1SW2(config)#int vlan 23
Rack1SW2(config-if)#no bridge-group 1
Rack1SW2(config-if)#^Z
Rack1SW2#wr
Building configuration...
[OK]
Rack1SW2#
*Mar 1 00:04:17.839: %SYS-5-CONFIG_I: Configured from console by console
Rack1SW2#
*Mar 1 00:04:27.439: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.2.2 on Vlan23 from LOADING to FULL, Loading Done
Rack1SW2#wr
Rack1SW2#
Rack1R2#ping 173.1.23.8
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 173.1.23.8, timeout is 2 seconds:
!!!
*Aug 4 13:33:11.319: %OSPF-5-ADJCHG: Process 1, Nbr 150.1.8.8 on FastEthernet0/0 from LOADING to FULL, Loading Done!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 96/188/404 ms
Rack1R2#
Regard
---------------------------------
Choose the right car based on your needs. Check out Yahoo! Autos new Car Finder tool.
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:09 ART