ISSUE- ROUTE in OSPF DATABASE BUT NOT IN ROUTING TABLE ??

From: NITIN NITIN (ccie_study_123@yahoo.com)
Date: Wed Aug 15 2007 - 04:17:45 ART

Hi Group,
   
   
  I'm again struck ,,, :)
   
  I'm doing filtering on a router R5
  Flteing some routes via R5 ----
  i see routes filted but they dont come in routing table via R2 altought in
OSPF database table??????
   
  all router OSPF AREA 0 configured
   
  R5 Fa1/0 --------SW2------R2
  | |
SE2/0.1 p-2-p Ser 2/0
| |
======================
  
 
  Rack1R5
FastEthernet0/0 204.12.1.5
FastEthernet1/0 137.1.58.5
Serial2/0 unassigned
Serial2/0.1 137.1.15.5
Serial2/0.2 137.1.25.5
Serial2/0.4 137.1.45.5
Loopback0 150.1.5.5
   
R5----
  
router ospf 1
 router-id 150.1.5.5
 log-adjacency-changes
 network 137.1.25.5 0.0.0.0 area 0
 network 137.1.58.5 0.0.0.0 area 0
 network 150.1.5.5 0.0.0.0 area 0
 distribute-list 111 in FastEthernet1/0
!
ip classless
no ip http server
!
!
access-list 111 deny ip host 137.1.58.8 137.1.28.0 0.0.0.255
access-list 111 deny ip host 137.1.58.8 150.1.2.0 0.0.0.255
access-list 111 permit ip any any
Rack1R5# sh ip route ospf
     150.1.0.0/16 is variably subnetted, 2 subnets, 2 masks
O 150.1.8.8/32 [110/2] via 137.1.58.8, 00:02:37, FastEthernet1/0
  Rack1R5#sh ip ospf database
              OSPF Router with ID (150.1.5.5) (Process ID 1)
                  Router Link States (Area 0)
  Link ID ADV Router Age Seq# Checksum Link count
150.1.2.2 150.1.2.2 949 0x80000005 0x00E28D 4<<
150.1.5.5 150.1.5.5 170 0x80000008 0x0025F3 4
150.1.8.8 150.1.8.8 171 0x80000008 0x00B66C 3
                  Net Link States (Area 0)
  Link ID ADV Router Age Seq# Checksum
137.1.28.2 150.1.2.2 949 0x80000001 0x008A28<<<
137.1.58.8 150.1.8.8 171 0x80000001 0x00D5A6<<<<
Rack1R5#
  
Rack1R2#sh ip ospf interface brief
Interface PID Area IP Address/Mask Cost State Nbrs F/C
Lo0 1 0 150.1.2.2/24 1 LOOP 0/0
Fa0/0 1 0 137.1.28.2/24 1 DR 1/1
Se2/0 1 0 137.1.25.2/24 64 P2P 1/1
  Rack1SW2#sh ip ospf interface brief
Interface PID Area IP Address/Mask Cost State Nbrs F/C
Fa1/5 1 0 137.1.58.8/24 1 DR 1/1
Vl28 1 0 137.1.28.8/24 1 BDR 1/1
Lo0 1 0 150.1.8.8/24 1 LOOP 0/0
  Rack1R5#sh ip ospf interface brief
Interface PID Area IP Address/Mask Cost State Nbrs F/C
Fa1/0 1 0 137.1.58.5/24 1 BDR 1/1
Lo0 1 0 150.1.5.5/24 1 LOOP 0/0
Se2/0.2 1 0 137.1.25.5/24 64 P2P 1/1
   
  WHEN I SHUT THE INTERFACE TO SW2 ------
  I get routes
  Rack1R5#sh ip route ospf
     150.1.0.0/16 is variably subnetted, 2 subnets, 2 masks
O 150.1.8.8/32 [110/2] via 137.1.58.8, 00:08:08, FastEthernet1/0
Rack1R5#conf t
  Rack1R5(config)#int fa 1/0
Rack1R5(config-if)#shutdown
Rack1R5(config-if)#^Z
Rack1R5#sh ip route ospf
     137.1.0.0/16 is variably subnetted, 7 subnets, 2 masks
O 137.1.28.0/24 [110/65] via 137.1.25.2, 00:00:00, Serial2/0.2
O 137.1.58.0/24 [110/66] via 137.1.25.2, 00:00:00, Serial2/0.2
     150.1.0.0/16 is variably subnetted, 3 subnets, 2 masks
O 150.1.8.8/32 [110/66] via 137.1.25.2, 00:00:00, Serial2/0.2
O 150.1.2.2/32 [110/65] via 137.1.25.2, 00:00:00, Serial2/0.2
   
   
  PLEASE ADVISE AND HELP AS YOU U ALL ALWAYS DO ????

       
---------------------------------
Be a better Globetrotter. Get better travel answers from someone who knows.
Yahoo! Answers - Check it out.
       
---------------------------------
Boardwalk for $500? In 2007? Ha!
Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games.

This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:11 ART