From: Bajo (bajoalex@gmail.com)
Date: Wed Aug 22 2007 - 19:49:10 ART
I will check if both routers have priority set to zero first....
On 8/22/07, ISolveSystems <support@isolvesystems.com> wrote:
> Hello expert,
>
> R5(FA0/1) and R4(Fa0/0) are in VL45 as well as SW3 and SW4. For some
> reason, R4 and R5 stuck in two way. All the others neighbor up. I have
> turned on debugging and check the config and found nothing wrong.
>
> Any idea?
>
> Rack1R5(config-if)#do sh ip osp nei
>
> Neighbor ID Pri State Dead Time Address Interface
> 150.1.4.4 0 FULL/ - - 129.1.54.4
> Serial0/0/0.54
> 150.1.4.4 1 2WAY/DROTHER 00:00:39 129.1.45.4
> FastEthernet0/1
> 150.1.9.9 1 FULL/DR 00:00:32 129.1.45.1
> FastEthernet0/1
> 150.1.10.10 1 FULL/BDR 00:00:38 129.1.45.2
> FastEthernet0/1
> 150.1.8.8 1 FULL/DR 00:00:34 129.1.58.8
> FastEthernet0/0
> Rack1R5(config-if)#
>
> Rack1R4#sh ip osp nei
>
> Neighbor ID Pri State Dead Time Address Interface
> 150.1.5.5 0 FULL/ - - 129.1.54.5
> Serial0/0/0.54
> 150.1.6.6 1 FULL/BDR 00:00:34 129.1.46.6
> FastEthernet0/1
> 150.1.5.5 1 2WAY/DROTHER 00:00:31 129.1.45.5
> FastEthernet0/0
> 150.1.9.9 1 FULL/DR 00:00:37 129.1.45.1
> FastEthernet0/0
> 150.1.10.10 1 FULL/BDR 00:00:33 129.1.45.2
> FastEthernet0/0
> Rack1R4#
>
> Rack1SW3(config-if)#do sh ip osp nei
>
> Neighbor ID Pri State Dead Time Address Interface
> 150.1.4.4 1 FULL/DROTHER 00:00:35 129.1.45.4 Vlan45
> 150.1.5.5 1 FULL/DROTHER 00:00:32 129.1.45.5 Vlan45
> 150.1.10.10 1 FULL/BDR 00:00:34 129.1.45.2 Vlan45
> 150.1.10.10 0 FULL/ - 00:00:34 129.1.34.10
> Port-channel34
> Rack1SW3(config-if)#
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Kind Regards,Bajo
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:12 ART