From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Thu Aug 23 2007 - 18:50:33 ART
The command is "no autostate". I've found the command on the 3560s and
2800/3800s with switch cards (NM or WIC) installed but not the 3550s with
the IOS currently used in the lab.
Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
>----- Original Message -----
Subject: VLAN with no active ports
Date: Thu, August 23, 2007 13:37
From: "Travis Anderson" <totaldrive2000@yahoo.com>
> Is there a command to keep a SVI interface active with
> no active ports?
>
> Travis,
>
>
> ____________________________________________________________________________________
> Park yourself in front of a world of choices in alternative vehicles.
Visit the
> Yahoo! Auto Green Center.
> http://autos.yahoo.com/green_center/
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:12 ART