From: ISolveSystems (support@isolvesystems.com)
Date: Fri Sep 07 2007 - 10:57:59 ART
Is it practical to go through the procedure to get into ROMMON in the real
lab? Can I find the info from the DocCD?
Thanks.
On 9/6/07, Brian Dennis <bdennis@internetworkexpert.com> wrote:
>
> Get into ROMMON and do a confreg. You will be able to see the name of the
> file the router will try to boot.
>
> Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
> bdennis@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Canada)
>
>
> >----- Original Message -----
> Subject: IOS image name and boot sequence
> Date: Thu, September 6, 2007 20:46
> From: "ISolveSystems" <support@isolvesystems.com>
>
> > R3 and R4 are connected via ethernet. Question says that R3 failed to
> > recognized its flash memory. This caused R3 to try and boot a default
> IOS
> > image via TFTP. Without configuring R3, allow R3 to boot a default IOS
> > image from R4 in case that it cannot locate its own.
> >
> > How do I show the default boot sequence and filename?
> >
> > Thanks.
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:10 ART