From: Ben (bmunyao@gmail.com)
Date: Tue Sep 11 2007 - 03:21:49 ART
Jeff,
Don't forget to advertise the new loopback100 subnet into your IGP.
Ben
On 9/11/07, Jeff Koh <jkoh.tt@hotmail.com> wrote:
>
> thanks guys.
> so it will be as follow:
>
> R1 (Loopback 100 : 100.100.100.100), R3 (Loopback0: 3.3.3.3)
>
> ip pim sparse mode
> ip pim autorp-listener
> ip pim send-rp-announce loopback100 scope 16 group-list 16
> ip pim send-rp-discovery loopback0 scope 16
>
> thanks!!
>
> cheers,
>
>
>
> > Subject: RE: Multicast - Backup> Date: Mon, 10 Sep 2007 12:51:31 +0100>
> From: yemi.salau@siemens.com> To: hadek.el-ayachi@nsn.com;
> ccielab@groupstudy.com> > I agree with you mate, just responded to Dan's
> comment ... "Can not be> done using auto-rp, you will need to use BSR."> >
> Moreover, Jeff said no static-rp, so the only option will be one that> can
> push out the rp information to pim devices "automatically", Auto-rp> and BSR
> will usually fit the bill, but if you don't want to fiddle with> IP Address
> (when there is no higher address on R1 and you're not allowed> to configure
> a new one, and there is no restriction on using static-rp,> then obviously,
> you've got your alternative of combining static-rp with> auto-rp)> > Many
> Thanks> > Yemi Salau> > -----Original Message-----> From:
> nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of>
> hadek.el-ayachi@nsn.com> Sent: Monday, September 10, 2007 12:30 PM> To:
> ccielab@groupstudy.com> Subject: RE: Multicast - Backup> !
> > I Think the only way to answer these requirements is to use pim>
> listener and make the pim source address of R1 bigger than R3 IP pim> source
> address.> > > -----Original Message-----> From: nobody@groupstudy.com[mailto:
> nobody@groupstudy.com] On Behalf Of> ext Salau, Yemi> Sent: lundi 10
> septembre 2007 09:20> To: Dan C; Carlos Trujillo Jimenez> Cc:
> joe@affirmedsystems.com; jkoh.tt@hotmail.com; ccielab@groupstudy.com>
> Subject: RE: Multicast - Backup> > Hello Dan,> > Why can't Backup Rp be done
> with auto-rp? Without modifying the IP> Address of both RPs, I don't think
> BSR is the only way to go, also I> would be surprised if asked to configure
> BSR in a Cisco environment,> from the way things are going, Cisco is pushing
> the Auto-rp> implementation into the market more and more.> > Remember when
> a PIM device receive 2 entries of RP information for same> group, it sticks
> (prefers) with the one from auto-rp over static-rp> information.> > So in
> case you have R1 and R2 with loopb!
> ack Ips of 1.1.1.1 and 2.2.2.2> respectively, if I want to mak!
> e R1 the
>
> RP, I could do with a combination> of static and auto-rp without
> reconfiguring R1's IP> > I would simply advertise R1 as RP for group X via
> auto-rp and advertise> R2 as RP for same group X via static-rp .... That
> way, pim routers will> always prefer R1 over R2 even though R1 has a lower
> IP address.... So if> the R1 is unreachable, they then switch to R2> > Many
> Thanks> > Yemi Salau> > -----Original Message-----> From:
> nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of> Dan C>
> Sent: Monday, September 10, 2007 7:09 AM> To: Carlos Trujillo Jimenez> Cc:
> joe@affirmedsystems.com; jkoh.tt@hotmail.com; ccielab@groupstudy.com>
> Subject: Re: Multicast - Backup> > Hi Carlos,> > Can not be done using
> auto-rp, you will need to use BSR.> > Cheers,> Dan> > On 9/10/07, Carlos
> Trujillo Jimenez <nergal888@hotmail.com> wrote:> >> > Joe.> > from the
> example above, is there a way to manually force the router> > 1.1.1.1> >
> (lowest ip address) to be the active RP withouth modifyng i!
> p> addressing in> > both routers??> >> >> >> > >From: "Joseph Brunner" <
> joe@affirmedsystems.com>> >> > >X-OriginalArrivalTime: 10 Sep 2007 05:41:
> 23.0527 (UTC) > > >FILETIME=[38EB2D70:01C7F36D]> > >> > >Easy, Beavis...>
> > >> > >You didn't say we can't use AUTO RP...> > >> > >Ip pim autorp
> listener (read up on this command)> > >> > >Auto-rp mapping agent uses
> highest IP's to decide winner.> > >> > >3.3.3.3 beats 1.1.1.1. when
> 3.3.3.3 is gone, 1.1.1.1 will be rp.> > >> > >-J> > >> > >-----Original
> Message-----> > >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]
> On Behalf> Of> > >Jeff> > >Koh> > >Sent: Sunday, September 09, 2007 11:58
> PM> > >To: ccielab@groupstudy.com> > >Subject: Multicast - Backup> > >> >
> >Hi Guys,> > >> > >How do we come up with the following scenario?> > >> > >-
> Use PIM Sparse mode only.> > >- R3 (loopback: 3.3.3.3) backup of R1
> (loopback:1.1.1.1)> > >- No static RP.> > >- No BSR.> > >> > >How do we
> set up a redundant RP base on the above require!
> ment?> > >> > >thanks!> > >> > >cheers,> > >__________________!
> ________
>
> _______________________________________> > >Get the new Windows Live
> Hotmail!> > >
> http://www.discoverhotmail.com/Hotmail/Default.aspx?Locale=en-SG#2> > >>
> >> >_______________________________________________________________________>
> > >Subscription information may be found at:> > >
> http://www.groupstudy.com/list/CCIELab.html> > >> >>
> >_______________________________________________________________________> >
> >Subscription information may be found at:> > >
> http://www.groupstudy.com/list/CCIELab.html> >> >
> _________________________________________________________________> > Charla
> con tus amigos en lmnea mediante MSN Messenger:> >
> http://messenger.latam.msn.com/> >> >>
> _______________________________________________________________________> >
> Subscription information may be found at:> >
> http://www.groupstudy.com/list/CCIELab.html> >
> _______________________________________________________________________>
> Subscription information may be found at: >
> http://www.groupstudy.com/list/C!
> CIELab.html> >
> _______________________________________________________________________>
> Subscription information may be found at: >
> http://www.groupstudy.com/list/CCIELab.html> >
> _______________________________________________________________________>
> Subscription information may be found at: >
> http://www.groupstudy.com/list/CCIELab.html> >
> _______________________________________________________________________>
> Subscription information may be found at: >
> http://www.groupstudy.com/list/CCIELab.html
> _________________________________________________________________
> Get the new Windows Live Messenger!
> http://get.live.com/messenger/overview
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:10 ART