From: Joe Mama (jsmith1234550@gmail.com)
Date: Mon Sep 17 2007 - 17:38:20 ART
Hello Shine,
The routers will have a basic config on them. There may be routers
(backbone) that are already fully configured and you may not have
access to them.
Regards,
Joe
On 9/17/07, Shine Joseph <shinepjoseph@iprimus.com.au> wrote:
> Folks,
>
>
>
> Sorry, if this was answered earlier.
>
>
>
> Can anybody tell without violating the NDA, if the routers and switches in
> the lab are loaded with the initial config or is it like the vendor labs?
> You get the raw switch/router and the initial configuration files separately
> and you load them on to the devices?
>
>
>
> In either case, what's the best approach to check the initial configuration
> issues that they might have intentionally introduced?
>
>
>
> I am thinking of running a show command to spot this.
>
> Sh run | in router|monitor|ip address|access-
>
>
>
> Any pointers welcome.
>
>
>
> TIA,
>
> Shine
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:12 ART