From: Biggs, Jeff \(M/CIO/BIE\) (JBiggs@usaid.gov)
Date: Wed Sep 19 2007 - 11:05:47 ART
sh line
Tty Line Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int
0 0 CTY - - - - - 0 0 0/0 -
1 1 AUX 9600/9600 - host - - - 63 0 0/0 -
450 450 VTY - - - - 5 377 0 0/0 -
* 451 451 VTY - - - - 5 153 0 0/0 -
452 452 VTY - - - - 5 113 0 0/0 -
453 453 VTY - - - - 5 47 0 0/0 -
454 454 VTY - - - - 5 8 0 0/0 -
455 455 VTY - - - - 5 6 0 0/0 -
456 456 VTY - - - - 5 0 0 0/0 -
457 457 VTY - - - - 5 0 0 0/0 -
458 458 VTY - - - - 5 0 0 0/0 -
459 459 VTY - - - - 5 0 0 0/0 -
460 460 VTY - - - - 5 0 0 0/0 -
461 461 VTY - - - - 5 0 0 0/0 -
462 462 VTY - - - - 5 0 0 0/0 -
463 463 VTY - - - - 5 0 0 0/0 -
464 464 VTY - - - - 5 0 0 0/0 -
465 465 VTY - - - - 5 0 0 0/0 -
466 466 VTY - - - - - 0 0 0/0 -
Line(s) not in async mode -or- with no hardware support:
2-449
It would seem to me that 2001 should be the AUX line and that would allow me in.
Jeffrey Biggs
Sr. Network Engineer
M/CIO/BIE
CCNP, CCDA
240-646-5003
jbiggs@usaid.gov
This e-mail is intended for the addressee only. If you are not the intended recipient, please be aware that the unauthorised use or disclosure of the information it contains, or the unauthorised copying or re-transmission of the e-mail are strictly prohibited. Such action may result in legal proceedings. If the e-mail has been sent to you in error, please accept our apologies, advise the sender as soon as possible and then delete the message. Under the Freedom of Information Act 2000 / Data Protection Act 1998, the contents of this e-mail, whether it is marked confidential or otherwise, may be disclosed.
-----Original Message-----
From: Gregory Gombas [mailto:ggombas@gmail.com]
Sent: Wednesday, September 19, 2007 9:58 AM
To: Biggs, Jeff (M/CIO/BIE)
Cc: ccielab@groupstudy.com
Subject: Re: Reverse Telnet issue
It could be using a different line number, maybe 2065?
If you do a show line and add 2000 to the line number it should work.
On 9/19/07, Biggs, Jeff (M/CIO/BIE) <JBiggs@usaid.gov> wrote:
> AUX ROUTER CONFIG
>
> sh run | beg line
>
> line con 0
> password cisco
> stopbits 1
> line aux 0
> login local
> modem InOut
> transport input all
> transport output all
> stopbits 1
> line 66
> no activation-character
> no exec
> transport preferred none
> transport input all
> transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
> line vty 0 4
> password cisco
> login
>
> *********************************************************************************************************************************************
> CONSOLE ROUTER CONFIG
>
> sh run | beg line
> line con 0
> password cisco
> login
> transport preferred none
> transport output none
> stopbits 1
> line aux 0
> login local
> modem InOut
> transport input all
> transport output telnet
> stopbits 1
> line 66
> no activation-character
> no exec
> transport preferred none
> transport input all
> transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
> line vty 0 4
> password cisco
> login
>
> Jeffrey Biggs
> Sr. Network Engineer
> M/CIO/BIE
> CCNP, CCDA
> 240-646-5003
> jbiggs@usaid.gov
>
> This e-mail is intended for the addressee only. If you are not the intended recipient, please be aware that the unauthorised use or disclosure of the information it contains, or the unauthorised copying or re-transmission of the e-mail are strictly prohibited. Such action may result in legal proceedings. If the e-mail has been sent to you in error, please accept our apologies, advise the sender as soon as possible and then delete the message. Under the Freedom of Information Act 2000 / Data Protection Act 1998, the contents of this e-mail, whether it is marked confidential or otherwise, may be disclosed.
>
>
> -----Original Message-----
> From: Gregory Gombas [mailto:ggombas@gmail.com]
> Sent: Wednesday, September 19, 2007 9:34 AM
> To: Biggs, Jeff (M/CIO/BIE)
> Cc: ccielab@groupstudy.com
> Subject: Re: Reverse Telnet issue
>
> Its hooked up to your aux port right? Can you show the configuration
> of the aux port?
>
> I think you may need to specify transport input telnet...
>
> On 9/19/07, Biggs, Jeff (M/CIO/BIE) <JBiggs@usaid.gov> wrote:
> > Have a 3845 that I am trying to use to reverse telnet into another 3845.
> > I get the following:
> >
> > TEST-CRR01#tel 10.1.1.254 2001
> >
> > Trying 10.1.1.254, 2001 ... Open
> >
> >
> >
> > But cannot get any further. I have tried a myriad of command setups and
> > looked over many Cisco webpages on this, but no luck. Anyone have
> > similar experiences with this platform? I do this on other platforms
> > with no issues, just seems to be the 3845.
> >
> >
> >
> > Thanks,
> >
> >
> >
> > Jeffrey Biggs
> >
> > Sr. Network Engineer
> >
> > M/CIO/BIE
> >
> > CCNP, CCDA
> >
> > 240-646-5003
> >
> > jbiggs@usaid.gov <mailto:jbiggs@usaid.gov>
> >
> >
> >
> > This e-mail is intended for the addressee only. If you are not the
> > intended recipient, please be aware that the unauthorised use or
> > disclosure of the information it contains, or the unauthorised copying
> > or re-transmission of the e-mail are strictly prohibited. Such action
> > may result in legal proceedings. If the e-mail has been sent to you in
> > error, please accept our apologies, advise the sender as soon as
> > possible and then delete the message. Under the Freedom of Information
> > Act 2000 / Data Protection Act 1998, the contents of this e-mail,
> > whether it is marked confidential or otherwise, may be disclosed.
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:13 ART