From: Joseph Brunner (joe@affirmedsystems.com)
Date: Wed Sep 19 2007 - 18:57:21 ART
Assume there are multiple ways to solve a single task. I heard a "script"
checks the candidate's configs against a known good config solution for the
lab. Candidate's configs that don't pass the script check lose points. the
proctor gets a report from the script, and the script's report is good
enough for the proctor. If the script says FAIL the proctor starts on the
next candidates configs (great service for $1,400 bucks and 3,000 mile
flight, huh?)
Could someone please provide insight into come out on top in this process.
How do I know which way I should go if there are multiple correct solutions?
I will give an example. Which would the "script" probably like, which one
would it flag for grading proctor analysis? Could the script be nice, and
actually "accept" both?
Task -
"All packets larger than 1250 bytes arrving on Router6 G0/0 should be set to
precedence 3."
-two solutions come to mind.
Mqc
____
class-map match-all packets
match packet length min 1251
policy-map largepackets
class packets
set precedence flash
class class-default
int g0/0
service-policy input largepackets
Policy routing
____________
route-map largepackets permit 10
match length 1251 1500
set ip precedence flash
int g0/0
ip policy route-map largepackets
Thanks,
Joe
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:13 ART