From: anthony.sequeira@thomson.com
Date: Tue Sep 25 2007 - 14:52:16 ART
http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/relea
se/12.2_25_see/configuration/guide/sw8021x.html
Configuring IEEE 802.1x Authentication
"Beginning in privileged EXEC mode, follow these steps to configure IEEE
802.1x port-based authentication. This procedure is required.
Step 1 - configure terminal - Enter global configuration mode
Step 2 - aaa new-model - Enable AAA
________________________________
From: lalit gupta [mailto:lalit.tech@gmail.com]
Sent: Tuesday, September 25, 2007 1:36 PM
To: Sequeira, Anthony (NETg)
Cc: ccielab@groupstudy.com
Subject: Re: Dot1x and aaa-model relation
HI Anthony,
thanks for your inputs, Just to repeat your words so can i conclude that
there is no point in configuring dot1x without aaa.
Can u redirect me to some document which says that without aaa it is of
no use configuring dot1x . (If u have )
Rgrds
lalit
On 9/25/07, anthony.sequeira@thomson.com < anthony.sequeira@thomson.com
<mailto:anthony.sequeira@thomson.com> > wrote:
Yes - Catalyst switches can do port-based authentication, and this
feature relies upon the use of AAA. In order to have AAA on the Catalyst
switch, you must first use the aaa new-model command.
Anthony J Sequeira
#15626
Check Out the CCIE Written QoD
http://www.netmasterclass.net/CCIE/Self-Paced-Program/Written
-----Original Message-----
From: nobody@groupstudy.com [mailto: nobody@groupstudy.com
<mailto:nobody@groupstudy.com> ] On Behalf Of
lalit gupta
Sent: Tuesday, September 25, 2007 12:36 PM
To: Cisco certification
Subject: Dot1x and aaa-model relation
Hi Experts,
i m bit confused about the authentication of dot1x. Is there any meaning
configuring DOT1x without aaa new-model. I think authentication will not
happen if we dont confgure aaa with dot1x. But i m not sure about it.
Even i
m not able to search any document about their combination which says yes
or
no for AAA with dot1x. Can somebody help me to understanding this
concept.
Do i always require aaa when i configure dot1x ?
thanks and regards
lalit
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:16 ART