From: dee (devecchio.turner@sbcglobal.net)
Date: Thu Sep 27 2007 - 04:41:09 ART
Based on the ip address you gave..assuming this is internetwork expert and
from what I remember bb2 has a password of (md5) CISCO... Debug ip bgp
events and even without the debug it should tell you invalid hsh or
something similar?
On 9/27/07 2:15 AM, "Ajay Prakash" <ajay.prakash@networkpeople.co.in> wrote:
> Hello,
>
>
>
> I am kind of stuck while trying to get the BGP peering up between R2
> (192.10.2.2) and BB1 (192.10.2.254). Please give me some tips as to how to
> troubleshoot this
>
>
>
> R2 Fa0/0 ---------------- BB2
>
>
>
> Rack2R2(config-router)#do sh run | s bgp
>
> router bgp 200
>
> no synchronization
>
> bgp log-neighbor-changes
>
> neighbor 154.2.23.3 remote-as 300
>
> neighbor 154.2.23.3 send-community
>
> neighbor 192.10.2.1 remote-as 200
>
> neighbor 192.10.2.1 send-community
>
> neighbor 192.10.2.254 remote-as 254
>
> neighbor 192.10.2.254 ebgp-multihop 255 <<------ I dont think required,
> but just put in while trying to troubleshoot
>
> neighbor 192.10.2.254 update-source BVI1
>
> neighbor 192.10.2.254 send-community
>
> no auto-summary
>
>
>
> Rack2R2#sh run int bvi1
>
> interface BVI1
>
> ip address 192.10.2.2 255.255.255.0
>
> end
>
>
>
> Rack2R2#sh run int fa0/0
>
> interface FastEthernet0/0
>
> no ip address
>
> duplex auto
>
> speed auto
>
> bridge-group 1
>
> end
>
>
>
> Rack2R2(config-router)#do sh ip bgp summ
>
>
>
>
>
> Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down
> State/PfxRcd
>
> 154.2.23.3 4 300 21 21 13 0 0 00:14:24 0
>
> 192.10.2.1 4 200 23 20 13 0 0 00:16:27 10
>
> 192.10.2.254 4 254 0 0 0 0 0 never Active
>
>
>
>
>
> Rack2R2#p 192.10.2.254
>
>
>
> Type escape sequence to abort.
>
> Sending 5, 100-byte ICMP Echos to 192.10.2.254, timeout is 2 seconds:
>
> !!!!!
>
> Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms
>
>
>
> Rack2R2#traceroute 192.10.2.254
>
>
>
> Type escape sequence to abort.
>
> Tracing the route to 192.10.2.254
>
>
>
> 1 192.10.2.254 4 msec
>
>
>
> Rack2R2(config-router)#
>
> *Dec 17 08:42:26.950: BGP: 192.10.2.254 open failed: Connection timed out;
> remote host not responding, open active delayed 34335ms (35000ms max, 28%
> jitter)
>
>
>
> Rack2R2#debu ip bgp
>
> *Dec 17 08:35:15.482: BGP: Regular scanner event timer
>
> *Dec 17 08:35:15.482: BGP: Import timer expired. Walking from 1 to 1
>
> Rack2R2#debu ip bgp
>
> *Dec 17 08:35:29.926: BGP: 192.10.2.254 open failed: Connection timed out;
> remote host not responding, open active delayed 31912ms (35000ms max, 28%
> jitter)
>
> *Dec 17 08:35:30.482: BGP: Regular scanner event timer
>
> *Dec 17 08:35:30.482: BGP: Import timer expired. Walking from 1 to 1
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:16 ART