Password aging in ACS Cisco

From: Edouard Zorrilla (ezorrilla@tsf.com.pe)
Date: Mon Oct 01 2007 - 14:29:30 ART

• Next message: Joseph Brunner: "RE: Catalyst/Fiber Backbone Connectivity Problem"
• Previous message: Felix Nkansah: "Re: Catalyst/Fiber Backbone Connectivity Problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

It says : Password Aging over Telnet connections using the RADIUS protocol is
not supported.

,

To use this feature, verify that your NAS is running the TACACS+ or RADIUS
protocol for password aging over dialup connections. Only password aging over
interactive connection (Telnet) is supported with TACACS+.

and
The following conditions must also be met:

  a.. The CiscoSecure Authentication Agent (CAA) software must be installed in
Windows 95/98 or Windows NT/2000 on the PC from which the user will dial. The
CAA software is available at http://www.cisco.com.
All of this from :
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/csnt
26/usergd26/ch3.htm#367150

It means that I can not make the password age when I manage my switches using
SSH ?

Thanks a lot for your time,

Regards

• Next message: Joseph Brunner: "RE: Catalyst/Fiber Backbone Connectivity Problem"
• Previous message: Felix Nkansah: "Re: Catalyst/Fiber Backbone Connectivity Problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:11 ART