From: Joseph Brunner (joe@affirmedsystems.com)
Date: Wed Oct 03 2007 - 03:02:10 ART
Hi tac here ;)
You need to make sure the windows XP pc's have the DC as their dns server.
Also for performance I would suggest "ip tcp adjust-mss 1400" on all lan
facing interfaces... And if you have an ACL permit, all the windows domain
ports across the wan. There is a Q article you can read up on to know what
ports windows uses.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Venkey
Sent: Wednesday, October 03, 2007 1:39 AM
To: ccielab@groupstudy.com
Subject: windows AD across wan link
Hello
Have a situation where the hub site is using cisco 3825 router hosting the
windows DC. And 5 remote site with windows XP pc on their lan connected to
the hub site using a 1841 router.
Question is: is there any specific configuration to be done at the hub site
and remote routers for the remote site PCs to join the AD.
PS:remote PC are able to reach the hub sever via ping.
Thanks.
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:11 ART