From: sirus MOGHADASIAN (cyrus.mgh@gmail.com)
Date: Sun Oct 07 2007 - 07:25:26 ART
Hi,
I just turn on my lab and load my previous configuration to it , so send
output of show traffic-shaping for u but magically when I run this command
every thing is correct and output of show command is right. so it's a bug in
dynamips.
thanks for your response
On 10/7/07, shiran guez <shiranp3@gmail.com> wrote:
>
> *Dynamips is only a hardware emulator, *
>
> *here is a nested policy-map in a map-class*
>
> R1#sh policy-map int ser1/0
> Serial1/0: DLCI 105 -
>
> Service-policy output: SHAPE
>
> Class-map: class-default (match-any)
> 120 packets, 8006 bytes
> 5 minute offered rate 2000 bps, drop rate 0 bps
> Match: any
> Traffic Shaping
> Target/Average Byte Sustain Excess Interval Increment
>
> Rate Limit bits/int bits/int (ms) (bytes)
> 512000/512000 3200 12800 12800 25 1600
>
> Adapt Queue Packets Bytes Packets Bytes Shaping
> Active Depth Delayed Delayed Active
> - 0 120 8006 0 0 no
> R1#
> *And here is a legacy Traffic Shaping:*
> **
>
> R1#sh traffic-shape
>
> Interface Se1/0
> Access Target Byte Sustain Excess Interval Increment
> Adapt
> VC List Rate Limit bits/int bits/int (ms) (bytes)
> Active
> 102 56000 875 7000 0 125 875 -
>
> 103 56000 875 7000 0 125 875 -
>
> 104 56000 875 7000 0 125 875 -
>
> 113 56000 875 7000 0 125 875 -
>
> 105 1000000 7875 1000000 0 63 7875 -
>
>
>
>
> On 10/7/07, sirus MOGHADASIAN <cyrus.mgh@gmail.com> wrote:
>
> > Hi GS,
> >
> > does dynamips do traffic shaping ? it seems frame-relay traffic shaping
> > not
> > work on dynamips.
> >
> > anyone have same a issue?
> >
> >
> >
> >
> >
> > Cyrus
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
>
> --
> Shiran Guez
> MCSE CCNP NCE1
> http://cciep3.blogspot.com
> http://www.linkedin.com/in/cciep3
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:12 ART